Donner Pedalboard Pedal Mounting Tape Length 2M Width 5CM Hook + Loop


Donner EC929 - Strong adhesive ability to keep your guitar pedals on your pedal board where they belong ! You never have to worry about your pedals falling off or the tap adhesive melting off. 3. Metal surfaces should be cleaned with Acetone prior to mounting. Simply cut to the length of your pedals, adhere to the back, and mount to your pedal board.

Manufactures high quality tap-like hook and loop adhesive tape, designed to keep your pedals securely attached to your pedal board in transit and at gigs. If you have a pedal board or pedal, this is the right product for you. 2. Mounting surfaces must be smooth, even and stable. 5. For maximum adhesion, expose the adhesive to hot air 140°-180° F for at least 2 minutes after mounting.

Donner Pedalboard Pedal Mounting Tape Length 2M Width 5CM Hook + Loop - Package included: 1 x donner pedal board Mounting Tap The pedal board tap:length 2m 78", Width 50mm2". The tape is 50mm2" wide, giving you optimal surface area to adhere to pedals. The back glue is made of strong adhesive ability glue. We supply a 2m 78" of tape, enough for around 15 average sized pedals. 4.

More information about Donner EC929

Donner Dp-1 Guitar Pedal Power Supply 10 Isolated DC Output for 9V/12V/18V Effect Pedal


Donner DP-1 - Power: ac 100v-240v input: dc 18v powers for 9v 12v or 18v pedal. Under the circumstances of all led lights on, LED light of the short-circuited channel will off, while lights in the other normal channels are still on. 1 x user manual. Specifications: Material: aluminum alloy, light weight and portable. Attention: incorrect polarity would damage this unit, please make sure correct positive and negative polar before wiring.

10 x dc power cable. Power: ac 100v-240v. 1 x power adapter. Input: dC 18v. 1 way 9v 500ma. This helps locating the faults when there were short circuits among many effectors. Color: black. 10 isolated output, isolated short circuit/overcurrent protected. Includes link power cables 10pcs. Material: aluminium alloy, light weight and portable.

Donner Dp-1 Guitar Pedal Power Supply 10 Isolated DC Output for 9V/12V/18V Effect Pedal - 1 way 12v 100ma. 1 way18v 100ma. Short-circuit protection All 10 outputs in this unit have separate short-circuit protection, i.

More information about Donner DP-1


Similar products



Donner 6 Inch Guitar Patch Cable Black 6-Pack Guitar Effect Pedal Cables


UnAssigned EC1048 - Specification: length: 6 Inch15CM Plug Diameter: 1/4 Inch6. 35mm material quality: oxygen-free Copper Wire Jacket Material: PVC Outer Diameter: OD4. 0*2mm the main purposes: audio, engineering and various kinds of information transmission Package included: 6 x 6 Inch Donner Guitar Patch Cable 10 isolated output, musical instruments, isolated short circuit/overcurrent protected.

Bright blue led for pedal board lighting & short circuit indicate. Includes link power cables 10pcs. 1. Solid and durable, good connection cable transmits high fidelity signal to the equipment. Power: ac 100v-240v input: dc 18v powers for 9v 12v or 18v pedal. Material: aluminium alloy, light weight and portable.

Donner 6 Inch Guitar Patch Cable Black 6-Pack Guitar Effect Pedal Cables - 21 awg high quality audio cable, 6" long for easy fit. 2. Shielding provides noise rejection for quiet operation, ultra low capacitance which lends to a pure signal transparency. 3. Two big core audio plug, in=out Technology, molded TS 1/4" Plugs are perfect for pedal boards. 4. Standard audio connector, utilize ultra-pure, solid outside casting, oxygen-free copper conductors for low capacitance and pure tone.

More information about UnAssigned EC1048


Similar products



Hosa IRG-600.5 Low-Profile Right Angle Guitar Patch Cable, 6 Inch 6 Pieces


Hosa IRG6005 - Ofc spiral shield for effective EMI and RFI rejection and flexibility. Bright blue led for pedal board lighting & short circuit indicate. Efficiently connect your pedal effects with the low profile patch cable by Hosa. Designed with right-angle plugs which allows for close spacing of pedal effects on pedalboards.

Power: ac 100v-240v input: dc 18v powers for 9v 12v or 18v pedal. Material: aluminium alloy, light weight and portable. Includes link power cables 10pcs. Oxygen-free copper OFC conductor for enhanced signal clarity. Hosa irg6005 patch cable features serviceable, all-metal plugs for live-sound applications Oxygen-Free Copper OFC conductor for enhanced signal clarity OFC spiral shield for effective EMI and RFI rejection and flexibility 10 isolated output, isolated short circuit/overcurrent protected.

Hosa IRG-600.5 Low-Profile Right Angle Guitar Patch Cable, 6 Inch 6 Pieces - 1. Solid and durable, good connection cable transmits high fidelity signal to the equipment. 21 awg high quality audio cable, 6" long for easy fit. 2. Shielding provides noise rejection for quiet operation, ultra low capacitance which lends to a pure signal transparency. 3.

More information about Hosa IRG6005


Similar products



Donner Power Cord


Donner EC1049 - Other cables may look thicker, but only because of more layers of PVC or PE insulation. Ofc spiral shield for effective EMI and RFI rejection and flexibility. Material: aluminium alloy, light weight and portable. Analog circuit design pedalsoverdrive, but digital reverb, distortion, tremolos, delay, compressors etc typically only need 20-50ma to run, preamp pedals can need 100-200ma.

Specification: Length: 23. 6 inch 60cm plug diameter: Male to Male 5. 5 x 2. 1 mm jack material quality: oxygen-Free Copper Wire Jacket Material: PVC Outer Diameter: OD2. 0*2mm package included: 10 x Pedal Power Cable 10 isolated output, isolated short circuit/overcurrent protected. Replacement cables for your pedal power supplies.

Donner Power Cord - 10 x 23. 6" 60cm and all the cables are made with 21AWG high quality copper wire. Male to male, one right angle and one straight jack. 5. 5mm outside diameter x 2. 1mm inside diameter, negative in the center. 30 days unconditional money back guarantee Backed Up By Our Awesome Customer Support, you can rest assured to buy our products.

More information about Donner EC1049


Similar products



Donner Guitar Patch Cables Right Angle,30cm 1/4 Instrument Cables for Effect Pedals 6 Pack


Donner EC890x6 - Power: ac 100v-240v input: dc 18v powers for 9v 12v or 18v pedal. If you want the best cable to go from your instrument to your rig, amplifier, the Donner Professional Guitar Effect Pedal Cable is the best choice. 5. All of these cables undergo extensive listening tests to ensure they meet Donner's standards of clarity, accuracy and quality.

Bright blue led for pedal board lighting & short circuit indicate. 21 awg high quality audio cable, 6" long for easy fit. 2. Shielding provides noise rejection for quiet operation, ultra low capacitance which lends to a pure signal transparency. 3. Two big core audio plug, in=out Technology, molded TS 1/4" Plugs are perfect for pedal boards.

Donner Guitar Patch Cables Right Angle,30cm 1/4 Instrument Cables for Effect Pedals 6 Pack - 4. Standard audio connector, solid outside casting, utilize ultra-pure, oxygen-free copper conductors for low capacitance and pure tone.5. Used for audio signal transmission of microphone, amplifier, mixing console and other equipment. Serviceable, all-metal plugs for live-sound applications. The cross-linked polyethylene dielectric is heat resistant and will not shrink as quickly as PVC.

More information about Donner EC890x6


Similar products



6 Inch - Dual Shielded 100% - Ultra Flexible - 6 Units - Instrument Effects Pedal Patch Cable w/ ¼ inch 6.35mm Low-Profile, R/A Pancake Type TS Connectors & Dual Staggered Boots - Audioblast HQ-1


AUDIOBLAST - Replacement cables for your pedal power supplies. 10 x 23. 6" 60cm and all the cables are made with 21AWG high quality copper wire. Male to male, one right angle and one straight jack. 5. 5mm outside diameter x 2. 1mm inside diameter, negative in the center. 30 days unconditional money back guarantee Backed Up By Our Awesome Customer Support, you can rest assured to buy our products.

1. The cables have an extremely low capacitance, superb noise rejection and amazing clarity. The black-gold connector design will also visually compliment your gear and will look extremely sleek in your rig. 1. Solid and durable, good connection cable transmits high fidelity signal to the equipment. Although made for rugged professional stage and studio use our reasonable pricing means that home users and enthusiasts alike will now have the pleasure of using these high-end, professional-grade cables without breaking the bank.

6 Inch - Dual Shielded 100% - Ultra Flexible - 6 Units - Instrument Effects Pedal Patch Cable w/ ¼ inch 6.35mm Low-Profile, R/A Pancake Type TS Connectors & Dual Staggered Boots - Audioblast HQ-1 - Material: aluminium alloy, light weight and portable. Also check connector dimensions. There are many images in the gallery, please click on the main image to open the full gallery. Power: ac 100v-240v input: dc 18v powers for 9v 12v or 18v pedal. 10 isolated output, isolated short circuit/overcurrent protected.

More information about AUDIOBLAST


Similar products



Dual Shielded 100% - 2 Foot - Instrument Effects Pedal Patch Cable w/ ¼ inch 6.35mm Low-Profile, R/A Pancake Type TS Connectors & Dual Staggered Boots - Audioblast HQ-1 - Ultra Flexible - 3 Units


AUDIOBLAST - 3 units - 2 foot - audioblast hq-1 - ultra flexible - dual shielded 100% - Guitar Bass Effects Instrument, Professional Patch Cable with Premium Nickel Plated ¼ inch 6. 35mm low-profile, right angled pancake type ts connectors & dual staggered boots - the hq-1 is an ultra-flexible cable & can be twisted when "s" shaped PATCH CONNECTIONS ARE CALLED FOR BETWEEN YOUR PEDALS.

5 year Replacement Warranty. Our pricing is really groundbreaking, please try us out and you will be pleasantly surprised, we are focused on bringing the highest value to our customers, please do not forget to compare our gear with legacy brands we will meet and exceed your expectations!. This sale is for 3 patch cables 3 units, each cable is 2 foot long.

Dual Shielded 100% - 2 Foot - Instrument Effects Pedal Patch Cable w/ ¼ inch 6.35mm Low-Profile, R/A Pancake Type TS Connectors & Dual Staggered Boots - Audioblast HQ-1 - Ultra Flexible - 3 Units - We are certain we have the cables you seek. We at audioblast guarantee that this is a professional-grade product, please do not judge our products based on their low prices, we back all our gear with a no questions asked 5 year Replacement Warranty. If you want the best cable to go from your instrument to your rig, amplifier, the Donner Professional Guitar Effect Pedal Cable is the best choice.

5. All of these cables undergo extensive listening tests to ensure they meet Donner's standards of clarity, accuracy and quality. 1. Solid and durable, good connection cable transmits high fidelity signal to the equipment.

More information about AUDIOBLAST


Similar products



OTraki 9V Power Supply for Guitar Pedals 10 Ports DC 18V/12V/9V 100mA/500mA 3Way Universal Isolated Output Effect Pedal Board Power Supplies with Smart Short Circuit and Over Current Protection


OTraki - 21 awg high quality audio cable, 6" long for easy fit. 2. Shielding provides noise rejection for quiet operation, ultra low capacitance which lends to a pure signal transparency. 3. Two big core audio plug, in=out Technology, molded TS 1/4" Plugs are perfect for pedal boards. 4. Standard audio connector, utilize ultra-pure, solid outside casting, oxygen-free copper conductors for low capacitance and pure tone.

5. Used for audio signal transmission of microphone, amplifier, mixing console and other equipment. Serviceable, all-metal plugs for live-sound applications. The conductive pvc sub-shield, served shield & the ultra-pure Oxygen Free Copper core ensure higher levels of signal transparency & quality, cancelling almost all electrical interference & microphonics.

OTraki 9V Power Supply for Guitar Pedals 10 Ports DC 18V/12V/9V 100mA/500mA 3Way Universal Isolated Output Effect Pedal Board Power Supplies with Smart Short Circuit and Over Current Protection - Bright blue led for pedal board lighting & short circuit indicate. We back this up with a 5 Year Replacement Warranty. Heavy-duty low-profile pancake plugs with staggered hand-assembled double boots for extra durability. 10 blue led for pedal board lighting and short circuit indicating. We have the widest range of Gold or Nickel plated, Standard Straight and Right-Angled cables on the planet.

We have the widest range of Gold or Nickel plated, Standard Straight and Right-Angled cables on the planet.

More information about OTraki


Similar products



Pedaltrain Power Supply Mounting Kit Pedalboards PT-VDL-MK


Voodoo Lab PT-VDL-MK - Although made for rugged professional stage and studio use our reasonable pricing means that home users and enthusiasts alike will now have the pleasure of using these high-end, professional-grade cables without breaking the bank. Audioblast hq-1 is a flexible professional-grade instrument cable ideal for a myriad of patching applications.

10 isolated output, isolated short circuit/overcurrent protected. 2. All our custom made cables are professionally soldered with a Proprietary 4% Silver solder blend. 21 awg high quality audio cable, 6" long for easy fit. 2. Shielding provides noise rejection for quiet operation, ultra low capacitance which lends to a pure signal transparency.

Pedaltrain Power Supply Mounting Kit Pedalboards PT-VDL-MK - 3. Two big core audio plug, in=out Technology, molded TS 1/4" Plugs are perfect for pedal boards. 4. Standard audio connector, utilize ultra-pure, solid outside casting, oxygen-free copper conductors for low capacitance and pure tone.5. Used for audio signal transmission of microphone, amplifier, mixing console and other equipment.

Serviceable, all-metal plugs for live-sound applications.

More information about Voodoo Lab PT-VDL-MK


Similar products



Donner Dt-1 Chromatic Guitar Tuner Pedal True Bypass


Donner DT-1 - The conductive pvc sub-shield, served shield & the ultra-pure Oxygen Free Copper core ensure higher levels of signal transparency & quality, cancelling almost all electrical interference & microphonics. Can be twisted when "S" shaped patch connections are needed. Detection method: audio signal input 5. Precision: 1cent 4.

5 year Replacement Warranty. Features 10 isolated output: otraki power supply is designed for effect pedal. Dimension: 95 x 46 x 49 cm 9. Do not use the pedal in the direct sunlight. Also check connector dimensions. 10 isolated output, isolated short circuit/overcurrent protected. 3. Ofc spiral shield for effective EMI and RFI rejection and flexibility.

Donner Dt-1 Chromatic Guitar Tuner Pedal True Bypass - Power: dc9v adaptor 8. Tuning range: a027. 5hz~c84186hz Tuning method: auto. If you want the best cable to go from your instrument to your rig, amplifier, the Donner Professional Guitar Effect Pedal Cable is the best choice. 5. All of these cables undergo extensive listening tests to ensure they meet Donner's standards of clarity, accuracy and quality.

More information about Donner DT-1


Similar products