#6 X 1/2″ Stainless Phillips Flat Head Sheetmetal Screw 3/8″ to 2″ in Listing 100 Sheet Metal Screws, 82 Degrees #6 x 1/2″

#ad
#ad
Chenango Supply #ad - 82 degree Head. Sheet metal screws have large threads for use in sheet metal sometimes also used in plastic, fiberglass, or wood. Phillips drives are X shaped for a phillips screw driver. 100 pieces per package. Phillips drive sheet metal screw. 6 x 1/2 inch. Flat heads sink into the material they are screwed into so that the head is flush.

18-8 stainless Steel for outdoor or damp applications.

More information about Chenango Supply #ad

Stainless Steel 304 Continuous Hinge with Hole, Bright Annealed Finish, 0.04" Leaf Thickness, 1-1/2" Open Width, 5/64" Pin Diameter, 1/2" Knuckle Length, 3' Long Pack of 1

#ad
#ad
S&S Hinges BA1003X36 #ad - The leaf is the flat metal portion of the hinge that extends laterally from the knuckle and revolves around the pin. A weldable material, stainless steel 304 is stronger than steel and aluminum. Continuous hinges, provide support to run the full length of the doors, panels, also called piano hinges, or pieces being joined together.

The range of motion for this hinge is 270 degrees from the folded position. Surface-mounted for applications requiring continuous support along the full length of the hinge, industrial kitchen equipment, such as appliance doors, and metal storage cabinets. Stainless steel 304 is corrosion resistant up to 1, 500 degrees F though less resistant to corrosion than stainless steel 316, weldable, and stronger than steel and aluminum.

Countersunk holes for convenience when mounting. The bright annealed finish gives this hinge a mirrorlike appearance and offers additional protection against corrosion. They also vary by knuckle length, leaf thickness, pin diameter, and open width. The knuckle is the tubular part of the hinge through which the pin passes, and knuckle length is the measurement of an individual section.

Stainless Steel 304 Continuous Hinge with Hole, Bright Annealed Finish, 0.04" Leaf Thickness, 1-1/2" Open Width, 5/64" Pin Diameter, 1/2" Knuckle Length, 3' Long Pack of 1 #ad - . Stainless steel 304 resists corrosion up to 1, 500 degrees F and is suitable for applications used in corrosive environments, though not as resistant to corrosion as stainless steel 316. Open width is the dimension from the outer edge of one leaf to the outer edge of the other when the hinge is fully open.

More information about S&S Hinges BA1003X36 #ad


Similar products



#8 X 1/2" Stainless Phillips Flat Head Sheetmetal Screw 1/2" to 2" in Listing 100 Sheet Metal Screws, 82 Degrees #8 x 1/2"

#ad
#ad
Chenango Supply #ad - Flat heads sink into the material they are screwed into so that the head is flush. Sheet metal screws have large threads for use in sheet metal sometimes also used in plastic, fiberglass, or wood. Phillips drive sheet metal screw. Surface-mounted for applications requiring continuous support along the full length of the hinge, industrial kitchen equipment, such as appliance doors, and metal storage cabinets.

#8 X 1/2" Stainless Phillips Flat Head Sheetmetal Screw 1/2" to 2" in Listing 100 Sheet Metal Screws, 82 Degrees #8 x 1/2" #ad - Stainless steel 304 is corrosion resistant up to 1, weldable, 500 degrees F though less resistant to corrosion than stainless steel 316, and stronger than steel and aluminum. Countersunk holes for convenience when mounting. Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance.

18-8 stainless Steel for outdoor or damp applications. 82 degree Head. 100 pieces per package. 8 x 1/2 inch. Phillips drives are X shaped for a phillips screw driver.

More information about Chenango Supply #ad


Similar products



InstallerParts Cable Tie Mount 22mm - Black – 100 Piece Pack

#ad
#ad
InstallerParts 4330221926 #ad - Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance. 100 pieces per package. With our factory direct low pricing, fast same-day shipping, flexible 30-day Amazon-matched return policy and a lifetime warranty on most non-electrical items, you can purchase InstallerParts products with maximum confidence.

8 x 1/2 inch. Surface-mounted for applications requiring continuous support along the full length of the hinge, industrial kitchen equipment, such as appliance doors, and metal storage cabinets. Stainless steel 304 is corrosion resistant up to 1, weldable, 500 degrees F though less resistant to corrosion than stainless steel 316, and stronger than steel and aluminum.

Countersunk holes for convenience when mounting. The 22mm black cable tie mounting base come in a 100-piece pack. Low profile color: these cable tie mounts are a black color that can be easily concealed for a neat appearance. Great for organization: Our wire cable tie mounts can be used anywhere for wire management and cord organization.

InstallerParts Cable Tie Mount 22mm - Black – 100 Piece Pack #ad - Multi-use: our plastic cable tie mounts can be used with wire management clips, electronic cord organizer, marine cable clamps, throttle cable clamps, stainless steel cable clamps, or anywhere clean looking wiring is needed!. Large quantity: this 100-piece R-Type Cable Clamp Assortment will help you take charge of your cord management.

More information about InstallerParts 4330221926 #ad


Similar products



Hillman Group 829720 1/4 by 20-Inch Stainless Steel Nylon Insert Locknut, 50-Pack, Single

#ad
#ad
The Hillman Group 829720 #ad - Hex stop nut. Nylon insert lock nuts have a captive undersized nylon washer that creates friction with the mating threads to prevent loosening. Hillman stainless steel Nylon Insert Coarse Thread Lock Nut - Stainless steel. Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance.

Material: stainless steel, industrial kitchen equipment, threads per inch: 20 tpi, finish: Zinc, Package Type: Box Surface-mounted for applications requiring continuous support along the full length of the hinge, such as appliance doors, Thread Density: Coarse, Pkg Qty: 50, Thread Diameter: 1/4", and metal storage cabinets.

Hillman Group 829720 1/4 by 20-Inch Stainless Steel Nylon Insert Locknut, 50-Pack, Single #ad - Stainless steel 304 is corrosion resistant up to 1, weldable, 500 degrees F though less resistant to corrosion than stainless steel 316, and stronger than steel and aluminum. Countersunk holes for convenience when mounting. Stainless Steel. 100 pieces per package. 8 x 1/2 inch. Helps resist the effects of vibration and other forces.

82 degree Head. Low-carbon steel. Low profile color: these cable tie mounts are a black color that can be easily concealed for a neat appearance.

More information about The Hillman Group 829720 #ad


Similar products



#4 x 3/8" Flat Head Sheet Metal Screws, Phillips Drive, Stainless Steel 18-8, Full Thread, Bright Finish, Self-tapping, Quantity 100 By Fastenere

#ad
#ad
Fastenere #ad - Phillips Drive #1. Phillips drive sheet metal screw. Flat head has a flat top and a taper. Sheet metal screws have sharp threads that cut into a material such as sheet metal, plastic or wood. Low profile color: these cable tie mounts are a black color that can be easily concealed for a neat appearance. Great for organization: Our wire cable tie mounts can be used anywhere for wire management and cord organization.

Multi-use: our plastic cable tie mounts can be used with wire management clips, stainless steel cable clamps, throttle cable clamps, electronic cord organizer, marine cable clamps, or anywhere clean looking wiring is needed!. Large quantity: this 100-piece R-Type Cable Clamp Assortment will help you take charge of your cord management.

#4 x 3/8" Flat Head Sheet Metal Screws, Phillips Drive, Stainless Steel 18-8, Full Thread, Bright Finish, Self-tapping, Quantity 100 By Fastenere #ad - . Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance. Head height 0067". Nylon insert lock nuts have a captive undersized nylon washer that creates friction with the mating threads to prevent loosening. 8 x 1/2 inch. They also make excellent fasteners for attaching metal hardware to wood because the fully threaded shank provides good retention in wood.

18-8 stainless steel provides strength and offers good corrosion resistance in many environments.

More information about Fastenere #ad


Similar products



INCRA Miter1000/HD Miter Gauge

#ad
#ad
Incra MITER1000/HD #ad - 8 x 1/2 inch. 18-8 stainless steel provides strength and offers good corrosion resistance in many environments. 180 angle lock indexing stops with 1-degree Step Spacing and Special Stops at ±22-1/2-Degree. Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance.

An excellent fit in the channel directly transfers the Miter 1000HD's incredible accuracy directly to your project. Helps resist the effects of vibration and other forces. The hd stands for high definition, because the protractor plate's exclusive Angle LOCK Indexing System has a whopping 180 angle stops in 1degree increments with special stops located at 22.

INCRA Miter1000/HD Miter Gauge #ad - 5 degrees. Head diameter 0212". 82 degree Head. Surface-mounted for applications requiring continuous support along the full length of the hinge, industrial kitchen equipment, such as appliance doors, and metal storage cabinets. Stainless steel 304 is corrosion resistant up to 1, weldable, 500 degrees F though less resistant to corrosion than stainless steel 316, and stronger than steel and aluminum.

Countersunk holes for convenience when mounting. Patented incremental Flip Shop Stop for Prefect Cut Length Control.

More information about Incra MITER1000/HD #ad


Similar products



Rok Hardware #6 x 3/4" Flat Head Phillips Deep Thread Wood Screws Nickel Zinc finish - Super Value 100 Pack

#ad
#ad
Rok #ad - Patented glide lock miter Bar Expansion Disks Provide a Perfect Fit. Heavy duty machined and laser cut Components. 8 x 1/2 inch. 18-8 stainless steel provides strength and offers good corrosion resistance in many environments. 180 angle lock indexing stops with 1-degree Step Spacing and Special Stops at ±22-1/2-Degree.

100 pieces per package. 18-8 stainless Steel for outdoor or damp applications. Extra-deep Phillips Recess to help minimize bit slippage. Low profile color: these cable tie mounts are a black color that can be easily concealed for a neat appearance. Great for organization: Our wire cable tie mounts can be used anywhere for wire management and cord organization.

Rok Hardware #6 x 3/4" Flat Head Phillips Deep Thread Wood Screws Nickel Zinc finish - Super Value 100 Pack #ad - Multi-use: our plastic cable tie mounts can be used with wire management clips, marine cable clamps, throttle cable clamps, stainless steel cable clamps, electronic cord organizer, or anywhere clean looking wiring is needed!. Large quantity: this 100-piece R-Type Cable Clamp Assortment will help you take charge of your cord management.

Head height 0067". Phillips Drive #1. Patented incremental Flip Shop Stop for Prefect Cut Length Control.

More information about Rok #ad


Similar products



Stainless Steel 304 Continuous Hinge with Hole, Bright Annealed Finish, 0.04" Leaf Thickness, 2" Open Width, 5/64" Pin Diameter, 1/2" Knuckle Length, 2' Long Pack of 1

#ad
#ad
S&S Hinges BA1004X24 #ad - Size: 6 x 3/4". Phillips Drive #1. Size: these electrical cable tie mount are 22mm. They are manufactured in a variety of materials and sizes, finished or unfinished, with or without holes, and can be cut to specific sizes. Phillips drive sheet metal screw. 18-8 stainless Steel for outdoor or damp applications.

Stainless Steel 304 Continuous Hinge with Hole, Bright Annealed Finish, 0.04" Leaf Thickness, 2" Open Width, 5/64" Pin Diameter, 1/2" Knuckle Length, 2' Long Pack of 1 #ad - Patented incremental Flip Shop Stop for Prefect Cut Length Control. Helps resist the effects of vibration and other forces. This finished hinge is suited for applications such as cabinetry and piano lids where a polished hinge as opposed to a flat finished or unfinished hinge is a priority. The leaf is the flat metal portion of the hinge that extends laterally from the knuckle and revolves around the pin.

Extra-deep Phillips Recess to help minimize bit slippage. 82 degree Head. Head height 0067". They also vary by knuckle length, leaf thickness, pin diameter, and open width. Thread diameter 0112". Heavy duty machined and laser cut Components.

More information about S&S Hinges BA1004X24 #ad


Similar products



Stainless Steel 304 Continuous Hinge with Hole, Bright Annealed Finish, 0.04" Leaf Thickness, 2" Open Width, 3/32" Pin Diameter, 1/2" Knuckle Length, 4' Long Pack of 1

#ad
#ad
S&S Hinges #ad - Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance. Head height 0067". Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance. Continuous hinges, provide support to run the full length of the doors, also called piano hinges, panels, or pieces being joined together.

Low profile color: these cable tie mounts are a black color that can be easily concealed for a neat appearance. Great for organization: Our wire cable tie mounts can be used anywhere for wire management and cord organization. Multi-use: our plastic cable tie mounts can be used with wire management clips, marine cable clamps, electronic cord organizer, throttle cable clamps, stainless steel cable clamps, or anywhere clean looking wiring is needed!.

Stainless Steel 304 Continuous Hinge with Hole, Bright Annealed Finish, 0.04" Leaf Thickness, 2" Open Width, 3/32" Pin Diameter, 1/2" Knuckle Length, 4' Long Pack of 1 #ad - Large quantity: this 100-piece R-Type Cable Clamp Assortment will help you take charge of your cord management. Phillips Drive #1. Patented glide lock miter Bar Expansion Disks Provide a Perfect Fit. This finished hinge is suited for applications such as cabinetry and piano lids where a polished hinge as opposed to a flat finished or unfinished hinge is a priority.

Nylon insert lock nuts have a captive undersized nylon washer that creates friction with the mating threads to prevent loosening. They are manufactured in a variety of materials and sizes, with or without holes, finished or unfinished, and can be cut to specific sizes.

More information about S&S Hinges #ad


Similar products



Hillman 830502 Flat Washer Stainless-Steel

#ad
#ad
The Hillman Group 830502 #ad - Stainless steel coating for a corrosion resistant finish. Size: 6 x 3/4". Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance. Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance. These washers help to prevent bolts or nuts from pulling through a surface.

Nylon insert lock nuts have a captive undersized nylon washer that creates friction with the mating threads to prevent loosening. Surface-mounted for applications requiring continuous support along the full length of the hinge, industrial kitchen equipment, such as appliance doors, and metal storage cabinets.

Hillman 830502 Flat Washer Stainless-Steel #ad - Stainless steel 304 is corrosion resistant up to 1, 500 degrees F though less resistant to corrosion than stainless steel 316, weldable, and stronger than steel and aluminum. Countersunk holes for convenience when mounting. 1/4'' stainless steel Commercial flat washer 100 Pack. Stainless Steel. Removable retaining Clip for T-Slot Miter Channels.

18-8 stainless steel provides strength and offers good corrosion resistance in many environments. 180 angle lock indexing stops with 1-degree Step Spacing and Special Stops at ±22-1/2-Degree. Surface-mounted for applications requiring continuous support along the full length of the hinge, such as appliance doors, industrial kitchen equipment, and metal storage cabinets.

More information about The Hillman Group 830502 #ad


Similar products